VoIP Entry Phone Mounts

Description

– Self diagnostic reports via email (testing com, mic, speaker & switch)- Automatic polling and programming software included- 2 Amp relay contacts for door/gate or SL-2 strobe light control- Blue ?Call Connected? LED indicator (E-30/E-32-IP only)- SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)- PoE powered (class 1, <4 watts)- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments- VoIP eliminates the need for ?Push to Talk? mode- Network downloadable firmware- T-10 Torx security screws for added security- Handsfree operation- Marine grade 316 stainless steel prevents corrosion on the stainless steel models- Laser etched graphics on stainless steel models- Programmable to dial up to 5 numbers on busy or ring no answer- Cycles through backup phone numbers on busy or no-answer- Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859- Hangs up on busy signal, time-out or touch tone command- Remotely programmable- Extended temperature range (-40?F to 140?F)- 3 different chassis or board only available- Volume adjustments for microphone and speaker- E-10-IP and E-30-IP are flush mountable using the included rough-in box or can be surface mounted using an optional VE-5x5 Surface Mount Box (DOD# 424)- E-32-IP flush mounts in a standard double gang electrical box (not included) or can be surface mounted using an optional VE-5x5 Surface Mount Box (DOD# 424)